|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features.
|
Dremel Mandrel, HSS, Dimensions: 3 in L, Suitable for: Model 414, 422 and 429 Dremel Accessories
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
To be used with all cutting wheels, sanding discs and polishing wheels.
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
Turn your Dremel? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One pair of motor brushes. For use with Dremel? rotary tool model(s) 100, 200, 275, 285, 300, 395 and 595 (Type 3, 4, 5 and 6). And Dremel? contour sander 6000 (Type 1 and 2).
|
Turn your Dremel? rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank.
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dremel? chain saw sharpening stone is for use with Dremel? chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety.
|
Precision ground abrasive stone for quick, easy sharpening of chain saw blades.
|
Dremel? accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the Dremel? chain saw sharpening attachment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.
|
The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DERMEL EZ lock makes accessory changes easy as pull twist release. The one-piece mandrel design simplifies the process of changing accessories, for use with the EZ402 EZ lock mandrel or standard 402 mandrel.
|
The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish.
|
The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
Can be used to replace or add sanding sleeves to Forney? Industries item# 60217, four piece 1/2 x 1/2 in red grit sanding drum kit with 1/8 in shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm.
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
Forney Wire Brush Set, 1 in Diameter, 1/8 in Arbor/Shank, Steel Bristle, 15,000 rpm Speed, Suitable for: 1/8 in Shank Dremel, Moto-Tool, Craftsman, Wizard, Black & Decker Tools, Includes: (2) Wire Brushes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter.
|
Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components.
|
|
|
|
