|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4-20 male threads on both ends, 1/4 in rod Dia.
|
The Cord Connect? is a simple, practical and effective patented cord lock. Includes a clamshell design that enables you to simply close the cord lock around each end of the cord and then twist to lock the cords together. The Cord Connect? will provide a secure, water-tight connection for extension cords outdoors. Run cords in out of the way, hard to reach places without worry of being disconnected. The Cord Connect? will lock the connection while keeping it water-tight for worry-free power.
|
The Cord Connect? is a simple, practical and effective patented cord lock. Includes a clamshell design that enables you to simply close the cord lock around each end of the cord and then twist to lock the cords together. The Cord Connect? will provide a secure, water-tight connection for extension cords outdoors. Run cords in out of the way, hard to reach places without worry of being disconnected. The Cord Connect? will lock the connection while keeping it water-tight for worry-free power.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem, threaded at one end. 1/4-20 thread on stem/thumb screw.
|
Corrosion-resistant, lightweight and suitable for a broad range of destructive fluids. Suitable for 175 deg F. For open tank service only. Orange for ultra-violet light protection. 1/4-20 spud connector, for 1/2 in and 3/4 in Robert or Flippen valves.
|
Brass with threads on both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass with threads on both ends.
|
Highly corrosion-resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 deg F.
|
Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 psi or from gravity flow with optional special orifice. Outer housing molded of high impact resin. Withstands weather and abuse. Durable molded float. Two sets of brackets. Fits poly tanks and steel tanks. 300 gph.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end.
|
Highly corrosion-resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 deg F.
|
Highly corrosion-resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only.
|
Series ST750 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 3/4 in male NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This Series is ideal for use in air conditioning, refrigeration and irrigation systems.
|
Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No R400-1/2 12 gpm at 35 psi, 22 gpm at 85 psi. No R400-3/4 21 gpm at 35 psi, 39.9 gpm at 85 psi.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Float valve replacement part. Valve arm set includes long arm, short arm and thumb screw only.
|
Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No R400-1/2 12 gpm at 35 psi, 22 gpm at 85 psi. No R400-3/4 21 gpm at 35 psi, 39.9 gpm at 85 psi.
|
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Rubbermaid Commercial stock tank drain plug kit built tough for superior performance and long-lasting durability in all kinds of weather extremes.
|
Fits all sizes Rubbermaid stock tanks.
|
Series ST1000 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 1 in male NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This Series is ideal for use in air conditioning, refrigeration and irrigation systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 psi or from gravity flow with optional special orifice. Precision die-cast outer housing. Durable molded float. Includes two sets of brackets. Fits poly tanks and steel tanks. 300 gph. Installation instructions included.
|
Heats the water, keeps open an ice-free area of approximately 30 in Dia down to sub-zero temperatures. Thermostatically controlled to operate only when necessary. Heavy-duty float will not rust, corrode or leak. Special 10 in heating element. 6 ft heavy-duty grounded wire. For use in metal tanks only. Individually packed. Rated at 120 AC voltage and 1500 W power.
|
Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 psi or from gravity flow with optional special orifice. Precision die-cast, durable molded float and molded non-siphoning unit. Complies with basic anti-siphoning regulations. Has a replaceable non-siphoning unit. 300 gph.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermostatically controlled to operate only when necessary. Designed to rest in the bottom of the tank unnoticed by livestock. Protective sturdy cage permits use in all tanks. Safe in plastic.
|
Thermostatically controlled to operate only when necessary. Keeps tanks up to 250 gal from completely freezing during winter. Uses less electricity than traditional 1500 W de-icers. Can be used in metal, plastic or rubber stock tanks. UL listed. Rated at 120 AC and 1250 W.
|
Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick, easy installation. Unnoticed by livestock, no cord in water. Safe in all tanks. Fits all Behlen, Freeland, Hastings, Rubbermaid, Applegate and all other plastic and metal tanks on the market. Thermostatically-controlled to operate only when necessary. Rated at 1500 W.
|
Freeland Stock Tank, 27 gal, Black, 20 in W, 42 in D, 12 in H
|
Series ST2000 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 2 in female NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This Series is ideal for use in air conditioning, refrigeration and irrigation systems.
|
|
|
