Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > FASTENING > POWER HAMMER PINS
Sort By:
1 2
PIN DRIVE SHANK .145IN 3/4IN PIN DRIVE KNURLED.145IN 1/2IN PIN DRIVE SHANK .145IN STD 1IN
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Blue Point Fasteners Drive Pin with Plastic Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Knurled, 1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
PIN DRIVE 3/4IN L 0.3IN HEAD PIN DRIVE SHANK .145IN 1-1/2IN FASTENING PIN GALV 0.3 X 3/4IN
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
Ramset 00810 Washered Pin PIN DRIVE SHANK .145IN STD 2IN FASTENING PIN GALV 0.3 X 1IN
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in. Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
Ramset 1516A Drive Pin PIN DRIVE 0.3IN HEAD 1-1/2IN FASTENING PIN KNRLD GALV 1/2IN
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in. Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
Ramset 1506 Drive Pin PIN DRIVE SHANK .145IN 2-1/2IN FASTENING PIN GALV 0.3X1-1/4IN
Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc, 3/4 in L, Suitable for: Remington, Bostitch, Hilti, Redhead, Ramset and Uniset Low Velocity Tools Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
Ramset 1512SDA Washered Pin FASTENING PIN GALV 0.3X1-1/2IN Ramset 1508 Drive Pin
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in. The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Powder Plated, Suitable for: Powder Actuated Tools
PIN DRIVE HEAD 0.3X2-1/4IN PIN DRIVE SHANK .145IN 3IN Ramset 06171/1503K Knurled Drive Pin
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
PIN DRIVE WASHER .145IN 1IN PIN DRIVE HD W/WSHR 0.3X2.5IN PIN DRIVE HEAD W/WSHR 0.3X3IN
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.
PIN DRIVE WASHER.145IN 1-1/4IN FASTENING PIN GALV 0.3 X 2IN PIN DRIVE WASHER.145IN 1-1/2IN
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
PIN DRIVE WASHER.145IN 2-1/2IN Ramset 1512 Drive Pin PIN DRIVE WASHER .145IN 2IN
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in. Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
   
 
1 2