|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers.
|
Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card.
|
Use on parking light, directional light and side marker light. 1-7/8 in x 5 ft, on a card.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.
|
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.
|
3M? red lens repair tape 03441 is designed for temporary repairs of broken or cracked taillights, parking lights and side directional lights. This flexible tape is suited for both flat, curved tail or signal lights.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick-Lock" port to connect. Single wire for electrical connection. Features 15,000 hr long life bulb.
|
Tough molded acrylic lens. Used to replace lenses of Peterson No 440, 441, 444 and 452 series lights. 4-1/2 in square.
|
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D.
|
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers.
|
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers.
|
Mounts with two stainless steel screws on 2 in centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16 in W x 1-3/16 in H x 1 in D.
|
For courtesy, interior or instrument lights, commonly used to illuminate license plate or step bumpers. Chrome-plated steel housing snaps into 1-1/4 in Dia holes. 1-1/2 in Dia overall. 2 required for legal license illumination.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8 in projection, 2-3/4 in W x 2 in H bracket mounts on 2 in centers.
|
Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.
|
Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10 in lead wires. Universal stud mount with 1/4 in studs on 2 in centers. 3-3/4 in H x 2-5/8 in D overall.
|
Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D.
|
Sealed 2-diode LED light alternative to traditional incandescent 154-Series lights. Operates from 9 to 16 V. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3 in centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16 in L x 1-1/16 in W x 15/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.
|
Functions as clearance or side marker light. 2-wire, hard-wired design. Operates from 9 to 16 V. Ground wire includes number 10 ring terminal. Mount using center stud or two mounting screws. 3-1/8 in W x 2 in H x 15/16 in.
|
Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.
|
Built for long-life duty as clearance, side marker or identification light. Lens is welded to housing to form single rugged unit. Includes 153 LED light, 150-095 mounting bracket and plug.
|
For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces.
|
PM Side Marker/Clearance Light, Round, 9 to 16 V, LED Lamp, Amber Lens, Grommet Mounting, 1.06 in Width, 0.51 in Height, Includes: Rubber Mounting Grommet
|
PM Side Marker/Clearance Light, Round, 9 to 16 V, LED Lamp, Red Lens, Grommet Mounting, 1.06 in Width, 0.51 in Height, Includes: Rubber Mounting Grommet
|
|
|
