|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with most drills. Easy to install, thermoplastic construction, corrosion-resistant steel shaft. Connects to garden hose, 3/4 in suction and discharge, maximum drill speed 1200 rpm, recommended drill chuck size 3/8 in or larger. Drill and garden hose sold separately.
|
Durable sonic welded thermo-plastic body.
|
Thermoplastic drill pump works with electric drills. Ideal to pump water or change oil with your electric drill as a power source.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable sonic welded thermo-plastic body.
|
Work with all pumps with a discharge size of 1-1/4 in or 1-1/2 in. For permanent or temporary use. 24 ft poly drainage tubing. Includes 1-1/4 in and 1-1/2 in adapters with rust-resistant hose clamps.
|
Universal design replaces most external pedestal pump float switches. Durable metal switch arm. Includes wire leads and mounting hardware. 120V, 15 amp.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty flexible hose for suction or discharge. For permanent or temporary use. Includes 1-1/2 in corrugated hose, 1-1/2 in male adapter and stainless steel hose clamp. 24 ft length.
|
For use with pedestal and submersible sump pumps. 24 ft x 1-1/4 in flexible drain tubing, 1-1/4 in and 1-1/2 in high-impact NPT barbed adapters, hose clamp included.
|
Attaches to electric drill. Standard hose threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-density polyethylene constructed. Meets ASTM D3350. CSA approved.
|
Non-mercury tethered float switch, 10 ft cord with piggyback plug, flexible wire construction. Run current of 13 A. Start current of 90 A. Liquid temperature of 140 deg F.
|
For SSF33, SSF50, CDU790 and CDU800 models.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"High density polyethylene construction. Includes three pre-formed inlet collars sized to fit 4"" corrugated polyethylene drainage lines. Molded side panel is designed lines. Molded side panel is designed to accept outside basement perimeter line at any elevation along well wall. Meets ASTM D3350. 18"" Dia. x 24"" Length. CSA approved. Lid not included."
|
Includes one water pump model WP10, with 12 ft, 1-1/4 in discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8 in of surface. Non-corrosive and uses 1-1/4 or 1-1/2 in discharge hose. Pumps approximately 800 gal of water per hour. Safe and easy to use. Boxed.
|
King Innovation Utility Pump, Discharge Tube Length: 72 in, Dimensions: 36 in L, Includes: (6) Utility Pumps
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 ft power cord, flexible wire construction, pump bracket sold separately. Run current of 13 A. Start current of 90 A. Liquid temperature of 140 deg F.
|
Superior Pump Multi-Purpose Hand Pump, Outlet Connection Size: 1-1/2 in, 18, 36 in OAL, Thermoplastic
|
Replaces most standard float switches. Ideal for 14 in Dia or larger sump basins. Piggy-back style plug with 10 ft cord. Mounting strap included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also, suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
|
1/4 hp split capacitor motor, high efficiency, low amp draw, 10 ft grounded waterproof power cord, pumps up to 30 gpm, 1800 gph, side and bottom intake provides for clog-resistant suction, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4 in male iron pipe discharge thread, standard hose adapter included. 1 year warranty from Superior Pump Co.
|
Manual, submersible pump. Ideal for dewatering applications. Reinforced thermoplastic construction will not rust or corrode. Screened bottom intake design removes water to within 3/16 in of surface. Rated at 1300 gph.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/3 hp reinforced thermoplastic submersible multi-use pump.
|
Good, dependable performance marks this product as the solution for many home de-watering applications.
|
Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Tough thermoplastic construction, Large 1-1/4 in top discharge for high capacity pumping. Garden hose adapter included. Can be used as a sump pump by adding an optional float switch. 4.1 A, handles 1/8 in solids. Pumps up to 40 gpm/2400 gph. 1 year warranty from Superior Pump.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Tempest? is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.
|
1/3 hp split capacitor motor, high efficiency low Amp draw, 10 ft grounded waterproof cord, pumps up to 40 gpm, 2400 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4 in male iron pipe discharge thread, 1-1/4 in female pipe adapter and 1-1/2 in male iron pipe adapter included. 1 year warranty from Superior Pump Co.
|
For use in sump basins 12 in or larger. Thermoplastic base, fully adjustable automatic switch, steel drive shaft, metal switch arm, 1-1/4 in discharge. Current rating of 2.76 A, 10 ft cord. Pumps up to 50 gpm/3000 gph. 1 year warranty from Superior Pump.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 in heavy-duty discharge hose. Includes 2 in male and female coupling. For engine drive pumps.
|
This portable, submersible utility pump is designed for non-automatic use in water. The units are equipped with a 9 ft. 3-prong grounding type power cord. The discharge fitting is designed for convenient attachment to a garden hose, in a temporary application.
|
Whether you need to remove water from a window well, basement or rooftop, this portable pump is versatile enough for the job.
|
|
|
