Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > THREAD SEALANT COMPOUNDS
Sort By:
1
Harvey's 023015-48 Pipe Joint Compound Harvey 030005-144 Pipe Thread Compound Oatey 31229 Great White
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Harvey? pipe thread stick is a non-hardening gray thread compound designed to lubricate and seal threaded joints on metal pipe. Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, Ammonia and Nitrogen gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Polypropylene, iron, steel or copper. NSF and IAPMO listed.
Harvey's 029035 Pipe Thread Compound Rectorseal 25790 Pipe Thread Sealant Rectorseal 23710 T-Plus 2 Pipe Thread Sealant
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe.
Plumb Pak PP854-2 Pipe Joint Compound Harvey's 023030 Pipe Joint Compound Oatey 31230 Great White
Plumb Pak Pipe Joint Compound, Net Content: 2 oz, Tube White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included.
Brass Craft PS1087 Seal 'N Check Kit Rectorseal 25631 Pipe Thread Sealant Harvey's 025020 Pipe Thread Compound
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle.
Rectorseal 23631 T-Plus 2 Plumb Pak PP854-1 Pipe Thread Sealant Oatey 15804 Hercules Pipe Thread Sealant
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Plumb Pak Pipe Thread Sealant, Net Content: 2 oz, Tube, Applicable Materials: TFE Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents.
Harvey's 029048 Pipe Thread Compound Harvey's 023045 Pipe Joint Compound Harvey's 025050 Pipe Thread Compound
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle.
Rectorseal 31631 Tru-Blu Oatey 15806 Hercules Pipe Thread Sealant Rectorseal 25551 Pipe Thread Sealant
Rectorseal Tru-Blu? pipe thread sealant with PTFE is a fast dry, flexible set thread sealant designed for high vibration environments such as refrigeration and industrial applications. PTFE has been added to enhance thread lubrication during assembly and break out. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC. Great for use as a positive lock and seal on threaded fasteners. Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Rectorseal 23551 T-Plus 2 Pipe Thread Sealant Harvey's 025080 Pipe Thread Compound Harvey's 028005-144 Pipe Thread Compound Display
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle. For sealing and lubricating threaded pipe joints. In smooth paste form. For steam, water, air and natural gas. Does not contain lead. Wipes clean from hands. Hang tab tube.
Oatey 31226 Pipe Joint Compound Rectorseal 25431 Pipe Thread Sealant Rectorseal 23431 T-Plus 2 Pipe Thread Sealant
Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic, may be used on water, natural gas, steam and air lines. Ideal for applying gaskets to flanges. Not for use on plastic threads. Rectorseal No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe.
   
 
1