Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > STOP & WASTE VALVES
Sort By:
1
B and K Industries 888-221RP Bleeder Caps B&K Proline Stop and Waste Valve B&K Proline 7700 Full Port Solder Ball Valve
Fits most drainable valves. Three styles of caps with washers included. Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 psia, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline Stop and Waste Valve STOP VALVE W/DRAIN 1/2IN B&K Proline 7700 Full Port Ball Valve
Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. SharkBite Stop Valve, 1/2 in Connection, PTC Connection, 200 psi, Temperature Rating: 200 deg F, Media: Portable Water, Trim Material: Stainless Steel, Softgoods Material: EPDM/Polysulfone, Body Material: DZR Brass, Polished Chrome, Natural, Includes: Drain/Vent, Suitable for: Copper, CPVC, PEX, PE-RT, HDPE Pipe -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 psia, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline Stop and Waste Valve B&K Proline Stop and Waste Valve B&K Proline Stop and Waste Valve
Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, solvent ends comply with ASTM 2846, certified to NSF 61.
STOP VALVE W/DRAIN 3/4IN B&K Proline Stop and Waste Valve B&K Proline 7700 Full Port Ball Valve
SharkBite Stop Valve, 3/4 in Connection, PTC Connection, 200 psi, Temperature Rating: 200 deg F, Media: Portable Water, Trim Material: Stainless Steel, Softgoods Material: EPDM/Polysulfone, Body Material: DZR Brass, Polished Chrome, Natural, Includes: Drain/Vent, Suitable for: Copper, CPVC, PEX, PE-RT, HDPE Pipe Rising stem, 6-point cast iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 psia, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline 7700 Full Port Solder Ball Valve B&K Proline 7700 Full Port Ball Valve B&K Proline 7700 Full Port Solder Ball Valve
-20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 psia, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 psia, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. -20 to 300 deg F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 psia, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline Ground Key Stop and Drain Valve B&K Proline Ground Key Stop and Drain Valve
Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8 in square key. Threaded ends comply with ANSI B1.20.2. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8 in square key. Threaded ends comply with ANSI B1.20.2.
   
 
1