|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Test Pipe Plug, Nominal Size: 1/2 in, Barb Connection, Suitable for: PEX Pipe
|
Apollo Test Pipe Plug, Nominal Size: 3/4 in, Barb Connection, Suitable for: PEX Pipe
|
The SharkBite? PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well each sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
The SharkBite? PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
Apollo PEX lead-free dezincification-resistant brass elbows are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve all sold separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
The SharkBite? PEX barb threaded female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is FNPT threaded on the other side.
|
Apollo Pipe Adapter, Nominal Size: 3/8 x 1/2 in, Barb x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Plumbing System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x FPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x Female Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Pipe Adapter, Nominal Size: 1/2 in, PEX x Male Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
The SharkBite? PEX barb sweat female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a female sweat connection that can be soldered.
|
The SharkBite? PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system on one-side and the other side is a male sweat connection that can be soldered.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo PEX? lead-free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX? fittings are suitable for both potable water and hydronic heating systems. Apollo PEX? fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve. Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX? fittings.
|
Apollo Pipe Adapter, Nominal Size: 3/4 in, PEX x Female Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
Apollo Pipe Adapter, Nominal Size: 3/4 in, PEX x Male Solder Connection, 200 psi, Operating Temperature: 200 deg F, Brass, Suitable for: PEX Pipes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SharkBite? PEX barb threaded male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system and is MNPT threaded on the other side.
|
The SharkBite? PEX swivel adapter is an easy-to-install solution to connect PEX tubing to a male threaded connection. These fittings are suitable for potable water distribution and hydronic heating applications. SharkBite? PEX barb fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well (each sold separately).
|
The SharkBite? PEX barb tee is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. The SharkBite? PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a stainless steel clamp system or a copper crimp ring system as well.
|
|
|
