|
|
|
|
|
|
|
|
|
|
|
|
|
|
This washer is an easy to install long-lasting washer that provides a watertight seal to help stop leaking between toilet tank and bowl. The diameters are 3-5/16 in L x 2-1/4 in W.
|
Flanged spud washer. 2 in.
|
Plumb Pak Toilet Tank-to-Bowl Gasket, Sponge Rubber, Suitable for: American Standard Models
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3-5/16 x 2-1/4 x 13/16 in.
|
Repair your leaky toilet with the Danco spud gasket. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Repair your leaky toilet with the Danco spud gasket for American Standard toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits most 3 in toilet flush valves.
|
The tank-to-bowl connector kit has 5/16 in x 3-1/8 in polished brass finish closet bolts and the washer is made of rubber.
|
Repairing your worn out flush valve parts can save water and money. This repair kit will replace parts for most American Standard toilets. These parts are made of durable rubber to provide reliable performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Repair your leaky toilet with the Danco spud gasket for Mansfield toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Repair your leaky toilet with the Danco spud gasket for Gerber toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Repair your leaky toilet with the Danco spud gasket for Mansfield toilets. The spud gasket fits inside the toilet on the base where the tank drains into the toilet bowl, forming a seal to hold the water in the tank. Replacing a worn out gasket will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 2 in tank to bowl gasket is universal to fit most 2 in 2-Piece toilet tanks. The universal sponge rubber design measures 2-1/8 in ID, 3-1/2 in outer diameter and 1-1/4 in thick. Easy to install, the 463 toilet parts.
|
The Tank-to-bowl Kit for Mansfield is an economical solution for a leaky toilet tank. The kit includes a rubber gasket, bolts, washers and nuts required for assembly. The kit works with Mansfield's Alto toilets with 2 in flush valves as well as many other models with a 2 in flush valve.
|
Includes 5/16-18 x 3 in tank bolts, nuts, washer and tank-to-bowl washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes 5/16-18 x 3 in tank bolts, nuts, washer and tank-to-bowl washer.
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, rubber spud gasket and washers. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, a sponge rubber spud gasket and a round shaped gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Assembly kit with gasket. Carded.
|
Contains 1 sponge rubber gasket, 2 brass bolts measuring 5/16" x 3', 4 flat brass washers, 4 flat rubber washers, 2 hex nuts, and 2 wing nuts.
|
Assembly kit with gasket. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 2 in tank to bowl gasket and hardware kit is universal to fit most 2 in 2-Piece toilet tanks. This toilet tank part uses universal sponge rubber design measures 2-1/8 in ID, 3-1/2 in OD and 1-1/4 in thick.
|
Help prevent leaks from occurring between your toilet tank and bowl with this tank-to-bowl kit. This 15-piece kit includes 2 brass-plated galvanized steel bolts, a rubber gasket and washers. Stopping the leak saves water, energy and money.
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts, rubber spud gasket and washers. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This secures and seals the toilet tank to the bowl. Fluidmaster bolts, screws and gaskets are what you need to install or repair a rocking toilet. All bolts are made from solid brass and all gaskets are made from high-quality rubber.
|
The large 3 in and 4 in tank to bowl gasket is designed to fit specific toilet models that were made after 2000. The universal sponge rubber design measures:,3 in inner diameter, 4-1/4 in OD and 1-1/8 in thick.
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts and a sponge rubber spud gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replace worn tank-to-bowl bolts and gaskets with this Danco kit, it is complete and ready to go. It includes durable tank bolts and a sponge rubber spud gasket. Installing new parts will keep the toilet tank solidly attached and prevent leaks between the tank and the bowl.
|
Harvey? specialty non-wax gaskets are flexible toilet seal gaskets designed to fit 3 in and 4 in waste lines.
|
The Large 3 in and 4 in tank to bowl gasket and hardware kit is designed to fit specific toilet models that were made after 2000. The universal sponge rubber design measures 3 in inner diameter, 4-1/4 in OD and 1-1/8 in thick. The included hardware is stainless steel to ensure a long, corrosion-resistant life.
|
|
|
