Home > HARDWARE > CONSTRUCTION HARDWARE > BUILDING HARDWARE > FORMED METALS/METAL EAVE DRIPS
Sort By:
1
Amerimax 5710300120 Hemmed Drip Edge Amerimax 5601400120 Eave Overhanging Standard Drip Edge Amerimax 5601900120 Overhanging Standard Drip Edge
Used to protect roof sheeting; guides run-off into gutters; galvanized to inhibit rust and corrosion, nail under shingles. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Overhang gives maximum protection from the roof run-off. Directs run-off into gutters. Used along gutter line of roof edge. Protects and covers roof edge. Acts as a starter strip for a true to align shingles. For new construction and re-roofs. 6 in x 10 ft to 1 in Face.
Amerimax 5701419120 Eave Overhanging Drip Edge Amerimax 5701400120 Eave Overhanging Standard Drip Edge Amerimax Economy 5509919120 Eave Overhanging Drip Edge
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
Amerimax Economy 5509900120 Eave Overhanging Drip Edge Amerimax 5504519120 Hemmed Drip Edge Amerimax 5504500120 Hemmed Standard Drip Edge
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the fascia board helping to eliminate rot. Standard gauge. 5/8 in overhang, throw out included in face size. 2-1/3 in x 10 ft to 1-1/2 in Face.
EDGE DRIP STD MF AL 4.5INX10FT
Amerimax Drip Edge Flashing, Aluminum, Material Thickness: 27 ga, Mill, Silver, Profile Type: F4, 10 ft L, 4-1/2 in W, 1 in H
   
 
1